Tag Archives: make

Elephant in the Baby’s Room – Making Baby Toys

 

stacked-toys

Handmade Baby Toys, or the Elephant in the Baby’s Room.  Two of my daughters recently gave me grandsons (a month apart).  I had to stop and really think about what I could make for these guys.  I am nervous about anything they can put in their mouths, that might come apart, so I made some baby toys that are going to be more decorative, at least until they get a little older. Continue reading Elephant in the Baby’s Room – Making Baby Toys

Build a Vintage Desk

https://youcanmakestuff.com/wp-admin/post.php?post=1996&action
Build a Vintage Desk

So, I decided it was time for a new desk.  I spent a lot of time on the internet and Pinterest looking for ideas.  I thought about an industrial design, or up-cycling found objects.  I decided that I wanted to build a vintage desk, styled from this one that can be seen on “brown dress with white dots”.

Continue reading Build a Vintage Desk

Joint This! How to Joint a Board With a Router

Steelcraft (1 of 1)-16

Sometimes you have a great piece of wood that has a natural edge, a bit of crook, or you want to put a taper on a board.  There are a

couple of ways to get a clean, straight edge on a board. The quickest is, of course, on a jointer.  You can also use a router table.  But you can also do it with a hand router and a straight edge guide, just like cutting with a circular saw.  In fact there are times when the combination of circular saw and router is the quickest and most flexible solution.  So, here it is, how to joint a board with a router. Continue reading Joint This! How to Joint a Board With a Router

Let’s Build a Drawer!!!

holes (1 of 1)-4There are several ways to build a drawer for a desk, a dresser, or your kitchen cabinets.  And while the traditional dovetail is a “hallmark” of a well built piece of furniture, the truth is, they require time, experience and tools that the average person doesn’t have.  For someone starting out in DIY, there has to be a simpler (cheaper) way to get the job done!

Guess what, there is… Pocket Holes –   In fact all you need for tools is a saw and a pocket hole jig!   Continue reading Let’s Build a Drawer!!!

How to Build a Table From Reclaimed Column for Less Than $35

Moprom 2015 (1 of 1)-3

From the moment we moved into the new house, the wife has been looking for a side table for the living room.

She looked everywhere, and we tried several tables of various shapes and sizes to no avail.

Finally, while at a furniture store, she found a table made from what looks like an old baluster, that she thought was a great inspiration piece.

Continue reading How to Build a Table From Reclaimed Column for Less Than $35

11 Ways to Find Cheap Furniture & Other Stuff to Paint or Up Cycle

When it comes time to find a new piece to make over or materials for making something, there are a lot of places to look besides the high priced stores. Here are some ideas for ways to find cheap furniture and other stuff for your next project.
Continue reading 11 Ways to Find Cheap Furniture & Other Stuff to Paint or Up Cycle

Getting started with a small shop (or no shop)

Sometimes, when we watch those DIY or woodworking shows, it looks like you need a huge shop and a lot of expensive tools to do anything. Well… it’s not true. I started with a few hand tools in the driveway, and stepped up to a skill saw and a sander, and a small shop, when I got married. With this massive set of tools (ha ha) I built our first dining table (with benches), a bookcase, end tables, an entertainment center and a chair. Now, this wasn’t the most beautiful stuff, it was a knock of of Cargo Furniture’s style (it was supposed to look like it was made from crates). These pieces of furniture lasted my growing family almost 15 years, before we sold them to someone else in need of some solid basic furniture.
Continue reading Getting started with a small shop (or no shop)